1. Type of Suit Fire Entry Suit 2. General Description Highly insulated Fire Entry suits worn by personnel in preparation for possible fie eruption in the immediate work area or for stand by operations should a rescue or evasive action require passage through a fire zone. 3. Material 3000 Series: 8 layer construction includes: Aluminized Z-Flex® outer shell, Z-Sil ®, 1-inch fiberglass insulation, aluminized vapor barrier, ZetexPlus®, 1-inch fiberglass insulation, aluminized vapor barrier, flame-resistant cotton lining. 4. Temperature Rating Short duration ambient heat of 1500°F (815°C), total flame of 2000°F (1093°C). Radiant heat to 3000°F (1650°C) for 3000 Series. 5. Construction A. Hood: Designed for use with an air mask. Built-in shell for structural support. Inner drape seals and underarm adjustment straps. Ratchet-adjustable hard cap with speedy clip for support. Hardened aluminum window frame with two gold-plated tempered glass lenses backed by two additional lenses for thermal protection. B. Coat: Double storm fly front. Flame seal with drawstring at coat bottom. C. Pants: High waist with 2” wide adjustable suspenders and adjustment straps on leg bottoms. D. Boots: Designed to fit over work shoes. Rear entry with overlap snap enclosure and adjustable take-up straps. Boot sole made from 2” of layered insulation, flame retardant cotton lining, aluminum foil, and wire-reinforced, flame-retardant neoprene fiberglass. E. Mitts: Heavy construction; made with ZetexPlus® fabric. Aluminized outer layer (3000 Series only). 6. Size and Weight 3000 Series Suit One size fits all. Approximate weight: 52 lbs (24 kg) 7. Certifications NXP 3000 suit is constructed from Z-Flex which is NFPA 701 / UL 214 certified and meets the following requirements: •EN 532:1992 Limited Flame Spread •EN 367:1992 Convective Heat •EN 366:1993 Method B Radiant Heat •EN 407:2004 Molten Metal Splash